J8 Series

Designed for designers

From ideation to creation, the J8 Series delivers a fully-functioning, multi-material, Pantone™ validated prototype 200% faster than traditional methods.

Design and creativity have no limits. Now, with the Stratasys J8 Series, the same is true for 3D prints. Our tried and tested technology simplifies the entire design process, streamlining workflows so you can spend more time on what matters – creating, refining and designing the best product possible.

J8 Series Materials

Rigid, flexible, transparent or opaque – our multi-material capacity means you can load up to seven materials at once. Expansive colour and texture combinations remove the need for model painting, helping you create the most realistic models in the shortest time possible. In addition, our two support material options dissolve easily, giving you the freedom to print complex and delicate features, without the hassle of laborious post-processing.

System Size and Weight

J826 System: 820 x 1310 x 665 mm (32.28 x 51.57 x 26.18 in.); 234 kg (516 lbs.)
J826 Material Cabinet: 1119 x 656 x 637 mm (44 x 25.8 x 25.1 in.); 153 kg (337 lbs.)
J835/J850 System: 1400 x 1260 x 1100 mm (55.1 x 49.6 x 43.4 in.); 430 kg (948 lbs.)
J835/J850 Material Cabinet: 1119 x 656 x 637 mm (44 x 25.8 x 25.1 in.); 153 kg (337 lbs.)

Build Size

J826: 255 x 252 x 200 mm (10 x 9.9 x 7.9 in.)
J835: 350 x 350 x 200 mm (13.8 x 13.8 x 7.9 in.)
J850: 490 x 390 x 200 mm (19.3 x 15.35 x 7.9 in.)

Layer Thickness

Horizontal build layers down to 14 microns (0.00055 in.)
55 microns (0.002 in.) in Super High Speed2
mode

Build Modes

High Quality: up to 7 base resins, 14-micron (0.00055 in.) resolution
High Mix: up to 7 base resins, 27-micron (0.001 in.) resolution
High Speed: up to 3 base resins, 27-micron (0.001 in.) resolution
Super High Speed2
: 1 base resin, 55 micron (0.002 in.) resolution

Accuracy

For J826: Typical deviation from STL dimensions, for models printed with rigid materials, based on size:
under 100 mm – ±100μ; above100 mm – ±200μ.
For J835 and J850: Typical deviation from STL dimensions, for models printed with rigid materials, based
on size: under 100 mm – ±100μ; above 100 mm – ±200μ or ± 0.06% of part length, whichever is greater.

Model Materials

• Vero™ family of opaque materials including neutral shades and vibrant VeroVivid™ colours
• Agilus30™ family of flexible materials
• Transparent VeroClear™ and VeroUltraClear

Digital Model Materials

Unlimited number of composite materials including:
• Over 500,000 colors
• Digital ABS Plus™ and Digital ABS2 Plus™ in ivory and green
• Rubber-like materials in a variety of Shore A values
• Translucent colour tints

Support Materials

SUP705™ (water jet removable)
SUP706B™ (soluble)

Please enter email to download brochure

Share This Page
Ask a question