Stratasys Launches the H550: Larger SAF Powder Bed Fusion Built for Production

Share This Post

Stratasys has unveiled the H550, a new SAF powder bed fusion 3D printer designed to give manufacturers bigger parts, higher throughput and a lower cost per part when producing final parts at scale.

Launched at Formnext 2026 in Frankfurt alongside the new PowderEase T2 powder handling system, the H550 extends the proven SAF production platform with a build volume nearly 80% larger than the H350.

As the UK platinum partner for Stratasys, we are delighted to bring the H550 to British manufacturers. Here is what you need to know.

More build volume for bigger parts and bigger batches

The H550 offers a 34.2 litre build volume, with a 365 x 208 x 450mm build envelope. Its 450mm long axis is 20% longer than the leading comparable print and fuse system, according to Stratasys.

In practical terms, that opens the door to larger individual parts such as UAV components, robotics and end of arm tooling, medical devices, automotive components, manifolds and ducts. It also means hundreds of smaller parts can be nested into a single build, so you can choose whether to go bigger or go further on volume.

Lower cost per part

Production economics are at the heart of the H550. Stratasys states that the system is designed to deliver up to 30% lower total cost of ownership than any other comparable print and fuse system currently available, with faster time to part than comparable SLS systems.

High packing efficiency, efficient powder utilisation and minimal consumables all support competitive costs across repeat production, while predictable build times keep planning simple even as nest density changes. Industrial printheads are designed for demanding production environments, with precise fluid control and no routine printhead replacement, helping to reduce consumable requirements and unplanned downtime.

Consistent quality across the whole build

Repeatable parts matter as much as fast ones. Distributed heating and thermal sensing maintain consistent thermal conditions across large parts, small parts and mixed builds, so every part in the build benefits from the same precise geometric accuracy and strong mechanical properties that SAF technology is known for.

The H550 runs qualified SAF materials developed for production grade performance, including SAF PA12 for high volume applications that demand dimensional accuracy at a low cost per part.

Under 30 minutes of operator time per build

The H550 launches with PowderEase T2, an automated workflow that handles breakout, powder retrieval, sieving and dosing. One T2 station can support up to six H550 systems running the same material, and the full production workflow needs under 30 minutes of total operator time per build.

That means less manual powder handling and more time for skilled operators to focus on production. The T2 also handles H350 builds that use the same material, so the H550 slots straight into an existing SAF workflow.

Where the H550 fits

The H550 complements the H350 rather than replacing it. It extends SAF into applications that need more capacity and bigger individual parts, giving manufacturers a choice of system based on their application, production volume and requirements. Reduced infrastructure requirements and a smaller production footprint also simplify installation on the factory floor.

It is well suited to general manufacturing, automotive, aerospace, consumer products, orthotics and prosthetics, and service bureaus. If you are weighing up your next powder bed fusion investment, or looking to bring short run production in house, the H550 is designed to make that case stronger.

Discover the H550 with SYS Systems

The H550 was unveiled at Formnext 2026 in Frankfurt. Closer to home, our team at the Advanced Innovation Centre in Derby is ready to talk through your applications, materials and production volumes, and to help you register your interest ahead of availability in 2027.

Discover the H550 today

Book a visit to our Advanced Innovation Centre and experience the full range of Stratasys technologies, alternatively arrange a visit from our additive experts.

Book a demo

For any sales, product information or pricing inquiries fill out the form on the right and we’ll get back to you as soon as possible.